Watch training videos on Molex products, from product overviews to termination processes. For more, free in-depth training, technical bulletins and useful tools, Data network installers, consultants and other professionals can access this material by signing up to our Customer Support Portal – register to become a Business Associate at csp.molex.com.
Training Videos
General
Product Overview: 4-Pair Termination Tool
The 4-Pair Termination Tool, p/n 31.0011, is designed for use with our DataGate and MOD-Clip jacks. The tool is easy to use and reduces installation time.
Patch Panel Looming
Learn how to do dress your patch panel correctly to ensure optimum network performance and comply with international standards.
Termination Process: G2 Xpress Connector
Process for terminating a Molex G2 Xpress Connector, p/n AFR-00387 to AFR-00395.
Polarity change/Pin change Process: MTP PRO Field Tool
Process for configuring a pin change (pin removal and pin insertion) and a polarity change for the MTP PRO connector, using the MTP PRO Field Tool, p/n AFR-00817.
Installation Process: C6A DataGate Jack, Iconic Face Plate Bezel & Clipsal Iconic Series Face Plate
Install the Iconic Face Plate Bezel p/n MOF-00015 and Molex PowerCat 6A DataGate Jack with Universal Shutter p/n KSJ-00096, into a Clipsal Iconic Series Face Plate.
Termination Processes for C6A Jacks and Plugs
Termination Process: C6A DataGate Jack, F/UTP Cable and 110 tool
Process for terminating F/UTP cable into a Molex PowerCat 6A DataGate Shielded Straight and Side Entry Jack, p/n KSJ-00096, using a 110 Punchdown tool.
Please note: While termination of the jack is possible with the 110 punch-down tool , tight tolerances within the outlet design could result in an unintentional short between the conductor wires and the metal housing. Therefore, Molex strongly recommends the use of the 4-pair termination tool to ensure even, consistent terminations, and minimize the risk of this occurring.
Termination Process: C6A DataGate Jack, U/FTP Cable and 110 tool
Process for terminating cable into a Molex PowerCat 6A DataGate Shielded Straight and Side Entry Jack, p/n KSJ-00096, using a 110 Punchdown tool.
Please note: While termination of the jack is possible with the 110 punch-down tool , tight tolerances within the outlet design could result in an unintentional short between the conductor wires and the metal housing. Therefore, Molex strongly recommends the use of the 4-pair termination tool to ensure even, consistent terminations, and minimize the risk of this occurring.
Termination Process: C6A DataGate Jack, U/FTP Cable and Multipair tool
Process for terminating cable into a Molex PowerCat 6A DataGate Shielded Straight and Side Entry Jack, p/n KSJ-00096, using a Multipair tool.
Termination Process: C6A ModClip Jack, U/FTP Cable and 110 tool
Process for terminating cable into a Molex PowerCat 6A MOD-Clip DataGate Jack, p/n MMC-00017, using a 110 Punchdown tool.
Termination Process: C6A ModClip Jack, U/FTP Cable and Multipair tool
Process for terminating cable into a Molex PowerCat 6A MOD-Clip DataGate Jack, p/n MMC-00017, using a Multipair tool.
Termination Process: Molex Shielded Cat6A Tool-less Keystone Jack
Process for terminating cable into a Molex PowerCat C6A Tool-less Shielded Keystone Jack, p/n KSJ-00079.
Angled MPTL Termination Process with C6A F/UTP Cable
Process for terminating F/UTP cable into a right-angled Molex PowerCat C6A Field Termination Plug, p/n KSP-00002.
Straight MPTL Termination Process with C6A F/UTP Cable
Process for terminating F/UTP cable into a straight Molex PowerCat C6A Field Termination Plug, p/n KSP-00001.
Process for Removing Rear Housing - C6A Jacks
Procedure for removing the rear housing of Shielded Category 6A Molex MOD-Clip DataGate Jack (MMC-00017) and DataGate Jack (KSJ-00096).
Termination Process: Cat6A UTP Keystone Jack Gen II and Multipair tool
Process for terminating cable into a Molex PowerCat C6A UTP Keystone Jack Gen II, p/n KSJ-00099, using a specifically designed Multipair tool, p/n 31.0016, compatible with the KSJ-00099 Keystone Jack.
Termination Process: Cat6A UTP Keystone Jack Gen II and 110 tool
Process for terminating cable into a Molex PowerCat C6A UTP Keystone Jack Gen II, p/n KSJ-00099, using a 110 Punchdown tool.
Straight MPTL Termination Process for C6A Field Termination Plug
Process for terminating U/FTP shielded cable into a straight Molex PowerCat C6A Field Termination Plug, p/n KSP-00001.
Angled MPTL Termination Process for C6A Field Termination Plug
Process for terminating U/FTP shielded cable into a right-angled Molex PowerCat C6A Field Termination Plug, p/n KSP-00002.
Termination Processes for C6 Jacks and Plugs
Termination Process: Cat6 DataGate Jack, UTP Cable and 110 tool
Process for terminating cable into a Molex PowerCat 6 DataGate Jack, p/n KSJ-00018, using a 110 Punchdown tool.
Termination Process: Cat6 DataGate Jack, UTP Cable and Multipair tool
Process for terminating cable into a Molex PowerCat 6 DataGate Jack, p/n KSJ-00018, using a Multipair tool.
Termination Process: Cat6 UTP Keystone Jack and 110 tool
Process for terminating cable into a Molex PowerCat C6 UTP Keystone Jack, p/n KSJ-00033, using a 110 Punchdown tool.
Termination Process: Cat6 UTP Keystone Jack and Multipair tool
Process for terminating cable into a Molex PowerCat C6 UTP Keystone Jack, p/n KSJ-00033, using a Multipair tool.
Termination Process: Cat6 UTP Modclip Jack and 110 tool
Process for terminating cable into a Molex PowerCat C6 UTP MOD-Clip DataGate Jack, p/n MMC-00010, using a 110 Punchdown tool.
Termination Process: Cat6 UTP Modclip Jack and Multipair tool
Process for terminating cable into a Molex PowerCat C6 UTP MOD-Clip DataGate Jack, p/n MMC-00010, using a Multipair tool.
Straight MPTL C6 Termination Process
Process for terminating Category 6 U/UTP cable into a straight Molex PowerCat C6 Field Termination Plug, p/n KSP-00003.