SLT3 Tester

Part No: 33A-100-10 , 33-100 , 33.D0020P , 33.B0020

Region: global

The SLT3 Tester is a rugged, lightweight product designed to verify the integrity of 1, 2, 3, and 4 pair UTP channels. Incorporating a unique 3-in-1 design, this tester features built-in modular jacks for USOC, EIA 568A and 568B wiring sequences. Simply connect the master and slave unit to each end of the cable under test, and the SLT3 automatically verifies correct cable sequence, as well as open and short circuits.

33A-100-10 – Available globally (except for Poland).
33-100 – Available in APAC/USA only.
33.D0020P – Available in Poland only.
33.B0020 – Available in APAC only.

The appearance of this product has changed. Read more

Features & Benefits Technical Info Related Products

Innovative 3-in-1 design features modular jacks for testing USOC, 568A and 568B cabling systems
Accurately verifies the continuity and sequence of 1-, 2- , 3, and 4 pair UTP and STP channels
Continuously-sequencing LED display provides a diagnostic readout that immediately detects shorts, opens, reversals and
mis-wires at a glance
Simply snap and lock master and remote units together when not in use
Ergonomically designed hand- held unit is lightweight, rugged, and impact-resistant
9 Volt alkaline battery included
SLT3 performs shield continuity on STP systems

MECHANICAL
Material: Thermoplastic UL94V-0 Black Case, red latch
Power Requirements: 9V Alkaline Battery (included)
Jack Contact Material: 50 μinches gold over 100μ inches nickel

PHYSICAL
SLT3 Single Line Tester
Set Dimensions: 146mm x 58mm x 38mm (5.75”H x 2.3”W x 1.5”D)
Shipping Weight: 224g (8 oz.)

Master Dimensions: 109mm x 58mm x 38mm (4.3”H x 2.3”W x 1.5”D)
Shipping Weight: 140g (5 oz.)

Remote Dimensions: 109mm x 58mm x 38mm (4.3”H x 2.3”W x 1.5”D)
Shipping Weight: 84g (3 oz.)

4 Pair Termination Tool Frame

CUSTOMIZE YOUR EXPERIENCE

SLT3 Tester