Relay 12V/250V DIN

The Relay 12V/250V DIN (Fig. 1) is an actuator of the CIIM system.
It is designed for use in situations where it is necessary to control terminals with high current or supply voltage exceeding 12 V.
The device provides galvanic isolation between the control system (CIIM module) and the load (target device). It has NO / NC potential free relay output, which enables connection to the voltage from the range 0 ÷ 250 V AC.
The TBW 2-pin connector must be connected to one of the output terminals (marked as Outputs 1–4) while the terminals must be installed in terminals A1 and A2.
It is supplied as standard with 2.5-meter cable with a TBW 2-pin plug.