PowerCat 6A U/FTP LS0H Cable Cca-s1a,d0,a1 Easy-pull box – UK

• Supplied in 305m easy-pull boxes for convenient handling and speedy installation
• Robust signal isolation required for C6A transmission performance
• Color coded for ease of termination
• Reaction to Fire Euroclass Cca-s1a,d0,a1

APPLICATIONS
PowerCat 6A U/FTP easy-pull cable is compliant with ANSI 568.2-D and ISO 11801:2017 Category 6A in the following configurations:
   • Two connector permanent link and channel when installed with PowerCat 6A DataGate Jack part nos:
   KSJ-00096-02 and KSJ-00096-04 and Molex C6A shielded patch cords.
   • Two, three and four connector permanent link and channel when installed with PowerCat 6A Keystone Jack part nos:
   KSJ-00079, KSJ-00088, KSJ-00092 and KSJ-00095 and Molex C6A shielded patch cords.

COMMERCIAL STANDARDS
ISO 11801:2017
ANSI/TIA-568.2-D-2018
IEC 60332-1
IEC 61034-1&2
IEC 60754-1 & 2
IEC 60332-3-22 (3A)

FIRE PROPAGATION TESTS
EU Regulation 305/2011 (CPR)
EN 50575:2014+A:2016
Euroclass: Cca-s1a,d0,a1

MECHANICAL
Conductor Size: 0.55+/-0.005mm
Primary Insulation: Polyethylene
Sheath Type: LS0H
Screen material: Al-foil
Drain wire: Tinned copper
External O.D: 7.4 +/-0.3mm
Sheath Color: Violet RAL4005
Average NVP%: 74% (nom.)
Minimum bend radius: 8 x o.d.
Maximum Pulling force: 80N
Operating Temperature: -20° to +70°C
Installation Temperature: 0° to + 50°C

ELECTRICAL
1.0-250 MHz Impedance (Ω): 100 ± 15
200 - 250MHz Impedance (Ω): 100+/-22
300- 500MHz Impedance (Ω): 100+/-25
DC Resistance (Ω/100m) max.: 9.38
DC Conductor Resistance Unbalance (%): Maximum 5.0

PHYSICAL
Shipping weight 305m easy-pull box: 17kg

PoE
Our PowerCat 6A system is suitable for the most demanding PoE applications:
   IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
   HD Base-T PoH up to 100W
   RP3 compliant as defined by EN 50174-2:2018, ISO/IEC 14763-2:2019 and AS/NZS 14763.2:2020
Notes:
   For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout. To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
   Molex recommends that the PoE feature on an individual switch port are power disabled prior to unplugging the associated powered Device.
   Molex recommends that the full range of PowerCat 6A products be used in a system to maximize cabling and PoE performance
Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/our-warranty/