x
earth

CUSTOMIZE YOUR EXPERIENCE

Close
Change Language: English Region: Americas

PowerCat 6A MOD-Clip Shielded Jack

'

Part No: MMC-00017-XX

Region: emea apac

The Molex PowerCat 6A MOD-Clip DataGate shielded Jack is a key component of the PowerCat 6A shielded end-to-end solution.

The PowerCat 6A DataGate jack offers superior alien crosstalk suppression, excellent insertion loss, and provides enhanced electromagnetic interference (EMI) protection by utilizing robust die cast zinc alloy connector body housing. This shielded connector also features a unique spring loaded shutter that not only protects it from dust and contaminates, but the ingenious spring-loaded design also ejects improperly seated patch cords. The shielded connector is dual color coded for either 568A or 568B wiring schedules. The Molex C6A DataGate RJ45 360 ° shielded jack accommodates flexible cable routing by allowing 90 ° or 180 ° cable entry.

The PowerCat 6A DataGate shielded Jack was specifically designed for high-speed data transmission. The DataGate PowerCat 6A shielded Jack is also backwards compatible with shielded C6 and C5e systems.

Molex recommends that the full range of PowerCat 6A Shielded products be used in an end-to-end system to maximize cabling performance. The PowerCat 6A shielded system is compliant with ANSI/TIA-568.2-D-2018 and ISO 11801:2017 for the support of 10GBASE-T.

Termination Process: Videos

The videos below, created by the Molex Technical Services Team, show the process for terminating cable into a Molex PowerCat 6A MOD-Clip DataGate Jack, p/n MMC-00017, using a 110 Punchdown tool and a Multipair tool.

Watch on YouTube – 110 Punchdown tool

Watch on YouTube – Multipair tool

Explore instruction videos on Molex website

Rear Housing Removal Process: Video

Watch on YouTube

Features & Benefits Technical Info Related Products
  • Robust die cast zinc alloy housing
  • 360°Shielded
  • Dual color coding allows 568A/B wiring
  • Patented IDC V-Shaped contacts that flex not fatigue when terminated
  • Spring-Loaded Shutter
  • Accepts color coded port identification labels
  • C6A Channel performance when installed as a complete PowerCat 6A Shielded System
  • Spring loaded cable/drain wire clamp
  • Cable can be terminated in 3 directions – Straight, on left or right side of jack
  • Complies with ISO/IEC 11801 and TIA Cat 6A channel and PL requirements
  • Jack can be terminated with 4 Pair Termination Tool or standard IDC Punch Down Tool
  • RoHS Compliant
  • Molex DataGate jacks may accommodate both solid (AWG22 to AWG24) and stranded (AWG26) cables

MECHANICAL
RJ45 Connector
Housing: Zinc Alloy plated bright Ni/Cu
Operating Life: Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 50μ Gold/ 50μ Nickel minimum
Contact Force: 100g minimum
Plug Retention Force: 6.8kg minimum

IDC Connector
Housing: Thermoplastic, UL94V-0
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Matte Tin
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid and 26 AWG stranded
Module Fascia: Thermoplastic UL94V-0

ELECTRICAL
Interface Resistance: 20mΩ
Initial Contact Resistance: 2.5mΩ
Insulation Resistance: >100MΩ

PHYSICAL
Minimum backbox requirement: 44mm
Shipping Weight: 25g (0.88 oz)
Dimensions: 17.8mm(W) x 23.1mm(H) x 41.3mm(L)

COMMERCIAL STANDARDS
ANSI/TIA-568.2-D-2018
ISO 11801:2017
IEC 60603-7
UL 1863
CSA C22.2

ENVIRONMENTAL STANDARDS
RoHS compliant
REACH compliant