PowerCat 6 U/UTP Patch Cord

• 4 pair 24 AWG stranded copper wire
• Pre-terminated with WE8W plugs
• Slim clear anti-snag slip on boots
• Suitable for EIA 568A or 568B wiring
• LS0H sheath
• RoHS Compliant

MECHANICAL
Cable
Conductor Size: 24 AWG stranded copper wire
Nom. O.D.: 5.9mm
Sheath: LS0H
Bend Radius: 4X O.D.
Operating Temperature: -25°C to +60°C

Plug
Minimum operating life: 750 insertion cycles
RJ45 Plug and Boot Material: Clear polycarbonate (PC)
Contact Material: 0.35mm thick copper alloy
Contact Plating: Selective gold
RJ45 Plug Dimensions compliant with:
ISO/IEC 60603-7-4 and FCC 47 Part 68

ELECTRICAL
Max voltage: 150 VAC (max)
Max current: 1.5A @ 25°C

COMMERCIAL STANDARDS
ANSI/TIA-568.2-D-2018
ISO/IEC 11801-1:2017
UL Listed
ETL Verified
AS/CA S008:2020
RoHS Compliant

FIRE PROPAGATION TESTS
LS0H Sheath: CSA FT1, IEC 60332-1, IEC 61034, IEC 60754

PoE
Our PowerCat 6A system is suitable for the most demanding PoE applications:
- IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
- HD Base-T PoH up to 100W
- RP3 compliant as defined by EN 50174-2:2018, ISO/IEC 14763-2:2019 and AS/NZS 14763.2:2020

Notes:
- For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout.
- To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
- Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
- Molex recommends that the full range of PowerCat 6A products be used in a system to maximize cabling and PoE performance.
Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/our-warranty/

Please note: Molex manufactures patch cords shorter than 1m. These cords can be used for channel or equipment interconnect,
however it is important to note that shorter cords do not meet the transmission test requirements outlined in the International Standards
due to their reduced length. Molex tests these shorter cords for mechanical and wiremap compliance