x
earth

CUSTOMIZE YOUR EXPERIENCE

Close
Change Language: English Region: Americas

24 Port PowerCat 6 Shielded DataGate Patch Panel, 568A/B, 1U

'

Part No: PID-00182

Region: global

Request a Quote
Download Datasheet

The PowerCat 6 Shielded Patch Panel features the shuttered shielded DataGate connector, which is dual color coded for either 568A or 568B wiring. The panel comes complete with an integral cable management tray for cable strain relief and tidy cable dressing. Port numbering is provided on the front and rear of the panel and individual ports may be color coded using connector icon labels for site-specific network administration.

Features & Benefits Technical Info
  • 24 Ports 1U
  • Rear cable management included
  • Color coded port option
  • 360° shielded shuttered DataGate connector
  • 568A/B wiring schedule
  • Graphite gray finish

IDC Connector
Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin/Lead Plate
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid

Patch Panel Characteristics
Material: CRS (cold rolled steel)
Thickness: .060" (1.52mm)
Coating: Graphite Grey Powdercoat

Mechanical Characteristics
Jack Connector
Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 1.25 micrometers Au/Ni
Contact Force: 100g minimum
Plug Retention Force: 6.8kg
Can: 0.25mm brass to C2680R pre-plated tin over nickel

Electrical Characteristics
Interface Resistance: 20mΩ
Initial Contact Resistance: 2.5mΩ
Insulation Resistance: >100 MΩ

Termination Tool: 110
Shipping Weight: 1.34kg

PoE
Our PowerCat 6 system is suitable for PoE applications as defined below:
IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
Notes:
For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout. To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
Molex recommends that the full range of PowerCat 6 products be used in a system to maximize cabling and PoE performance. Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/ourwarranty/