x
Part No: CAA-0322L-VL
Region: apac
THIS PRODUCT IS ONLY AVAILABLE IN APAC
Molex PowerCat 6A U/FTP LS0H Cable is specifically designed to support high speed data network applications such as 10-Gigabit Ethernet (10GBASE-T). The cable is constructed of 4 screened pairs and a drain wire. This cable minimizes alien crosstalk, provides excellent signal isolation and provides superior electromagnetic interference (EMI) protection.
Molex recommends that the full range of PowerCat 6A Shielded products be used in a system to maximize cabling performance. This system is compliant with ISO/IEC 11801 amendment 1 and TIA-568.2-D for the support of 10GBASE-T.
Other colors available: Gray, yellow, white, black, blue, green, orange and pink.
Mechanical Characteristics
Conductor Size: 23AWG
Primary Insulation: Polyolefin
Screen material: Laminated Aluminum
Sheath Type: LS0H
Nominal OD: 6.8mm +/- 0.4mm
NVP: 75-77%
Screen: Each pair enclosed in laminated aluminum foil
Drain Wire: tin-coated copper
Pulling Force:
Short Term: 400N
Long Term: 100N
bend radius: 8 x OD mm
Long Term bend radius: 4 x OD mm
Operating Temperature
Storage: -20˚C to +75˚C
Operation: -20˚C to +60˚C
Electrical/Optical Characteristics
Capacitance: 40 pF/m nom. @1 KHz.
DC Resistance: 72 Ω/Km max.
Propagation Delay: 514 + 36f1/2 nS/100m max @1-500 MHz
Propagation Delay Skew: 45 nS/100 max @ 1-500 MHz
Mean Impedance: 100Ω ± 6 @ 1-500 MHz
Voltage Rating: 2V dc maximum
Resistance Unbalance: 2% max.
Coupling Attenuation: 45dB min @30-100 MHz 40-20 Log (f/100) @ 100-500 MHz
Weight per 500m reel: 30kg
Commercial Standards
ISO/IEC 11801 amendment 2:2010
TIA-568.2-D Category 6A
IEC 61156-5
AS/CA S008:2020
EN 50173
RoHS compliant
REACH compliant
Fire Propagation Tests
IEC 60332-1
ASTM 2843; IEC 60754-2; IEC 60332-3-22
Applications
Category 6A U/FTP Cable is intended for high speed data applications up to 500MHz including:
IEEE 802.3 10GBASE-T 10Gb/s
IEEE 802.3 1000BASE-T 1Gb/s
TIA/EIA-854 1000BASE-TX 1Gb/s
ATM 155Mb/s 155Mb/s
ETL listed
PoE
Our PowerCat 6A system is suitable for the most demanding PoE applications:
- IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
- HD Base-T PoH up to 100W
- RP3 compliant as defined by EN 50174-2:2018, ISO/IEC 14763-2:2019 and AS/NZS 14763.2:2020
Notes:
- For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout.
- To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more https://www.molexces.com/poe-calculator
- Molex recommends that the PoE feature on an individual switch port are power disabled prior to unplugging the associated powered Device. Molex recommends that the full range of PowerCat 6A products be used in a system to maximize cabling and PoE performance Details on Molex requirements for Warranty can be found at https://www.molexces.com/about-us/our-warranty/
