x
Part No: PID-00145-04
Region: apac emea
Molex 50 Port Voice Patch Panel is designed to support 4, 25 or 50 Pair UTP cables in a voice backbone.
The LSA-style IDC to RJ45 jack assemblies allow for patching of up to 50 ports in 1U, using standard UTP RJ45 patch cords. Finished in black, this panel is a cost-effective solution for voice transmission over 2 pairs (3,6 and 4,5). The rear cable management tray provides cable strain relief and an earthing connection point (earthing strap not included).
Available only in Australia, India and Poland.
COMMERCIAL STANDARDS
ISO/IEC 11801 Class C (Category 3) 2 Pair
UL 1863
CSA C22.2
MECHANICAL
Panel Material: SPCC-SD (Cold Rolled Steel Sheet)
Thickness: 1.6mm
Finish: Power Coat Black
IDC
Plastic Housing: High-impact flame retardant UL94V-0 rated
Contact Material: Phosphor Bronze Alloy
Plating: Sn 100μ”min.
PCB: FR4 glass-reinforced epoxy laminate
Accommodation: 26-22 AWG solid or stranded
Operating Life: ≥200 terminations
RJ45 Jack
Jack Connector Housing: High-impact flame retardant UL94V-0 rated
Contact Material: Phosphor Bronze Alloy
Contact Plating: 15μ” Gold/ 100μ” Nickel
Operating Life: Minimum 750 insertion cycles
Ambient Installation and Operating Temperature: -40 to +70°C
PHYSICAL
Dimensions: 44mm (H) x 483mm (L) x 129 (D)
ELECTRICAL
Insulation Resistance: 10 MΩ min.
Dielectric Withstand Voltage: 1000 Volts; RMS: 60 HZ 1min.
Contact Resistance: 20 MΩ Max
Current Rating: 1.5Amps @20°C
IDC Interface Resistance: <0.5mΩ typical
ENVIRONMENTAL STANDARDS
RoHS Compliant
REACH Compliant
Shipping Weight: 1250g
Compatibility
Termination Tool: LSA 2A punch down termination tool
