x
Part No: KSP-00003
Region: apac emea
The Molex Category 6 field termination plug is designed to support 1gb networks and can be easily terminated using parallel jaw pliers.
Termination is accomplished by placing the conductors into the proper wire slots in the wire cap. Place the wire cap onto the plug and use pliers to squeeze the wiring cap. All eight conductors are simultaneously terminated when the wire cap is squeezed. This process ensures quick, consistent, reliable terminations. The IDC is designed to accommodate different diameter conductors from 23 AWG- 26 AWG Solid Wire. The Field Termination Plug meets TIA-568.2-D Category 6 component performance.
Ideal for use to provide wireless access points and other IP-enabled devices such as: Surveillance cameras and infrastructure monitoring. A field modular plug that is simple to terminate and meets Cat 6 performance requirements is also ideal in premise network applications, premise automation such as lighting, HVAC and other environmental sensor applications.
Available only in India and Sub-Saharan Africa.
Termination Process: Video
This video, created by the Molex Technical Services Team, show the process for terminating Category 6 U/UTP cable into a straight Molex PowerCat C6 Field Termination Plug, p/n KSP-00003.
MECHANICAL
Plug Housing: PA66+GF
Plug Pins: Phosphor bronze with 50μ” gold plating
Durability: 750 mechanical cycles
Transmission performance: Cat.6 /Class E
Wiring label: TIA 568A/B & PNO
Termination capability:
23~26 AWG solid wire
23~27 AWG stranded wire
Re-termination capability: 5 times
Supporting cable diameter: 6~9mm
ELECTRICAL
Current rating: 1.5A
Dielectric withstanding voltage: 1000V DC
Insulation resistance: 500M Ω MIN.
Contact resistance: 20m Ω MAX.
COMMERCIAL STANDARDS
ISO/IEC 11801-1
ANSI/TIA/EIA-568.2-D
EN 50173-1/ EN 50173-1
IEC 60603-7-4
IEC 60512-99-002:2019 4PPoE
UL1863
IEEE 802.3 bt POE Type 3 / Type 4 with 90W at PSE Side
Category 6A Shielded Field Termination Plug