PowerCat 6A DataGate Shielded Straight and Side Entry Jack

• Robust die cast zinc alloy housing
• 360°Shielded
• Dual Color coding allows 568A/B wiring
• Patented IDC (insulation displacement contact) V-shaped contacts that flex not fatigue when terminated
• Spring-Loaded Shutter
• Accepts color coded port identification labels
• Category 6A performance when installed as a complete PowerCat Shielded System
• Spring loaded cable/drain wire clamp
• Cable can be terminated in 3 directions – Straight, on left or right side of jack
• Complies with ISO/IEC 11801 and TIA Cat 6A channel and PL requirements
• Jack can be terminated with 4 Pair Termination Tool or standard IDC Punch Down Tool
• RoHS Compliant
• Molex DataGate jacks may accommodate both solid (AWG22 to AWG24) and stranded (AWG26) cables

MECHANICAL
RJ45 Connector
   Connector Housing: Zinc Alloy plated bright Ni/Cu
   Operating Life: Minimum 750 insertion cycles
   Contact Material: Copper Alloy
   Contact Plating: 50μ Gold/ 50μ Nickel minimum
   Contact Force: 100g minimum
   Plug Retention Force: 6.8kg minimum

IDC Connector
   Housing: Thermoplastic, UL94V-0
   Operating Life: Minimum 20 reterminations
   Contact Material: Copper Alloy
   IDC Contact Plating: Matte Tin
   Contact Force: 100g minimum
   Wire Accommodation: 22-24 AWG solid

ELECTRICAL
Interface Resistance: 20mΩ
Initial Contact Resistance: 2.5mΩ
Insulation Resistance: >100MΩ

PHYSICAL
Minimum Backbox Depth Requirement: Please refer to datasheet attached
Shipping Weight: 25g (0.88 oz)
Dimensions:
   180° Entry: 17.7mm(W) x 23.9mm(H) x 42.7mm(L)
   90° Entry: 21.1mm(W) x 23.9mm(H) x 37.0mm(L)

COMMERCIAL STANDARDS
ANSI/TIA-568.2-D Augmented Category 6
ISO 11801 Amd 1 Class EA
IEC 60603-7
UL 1863
CSA C22.2

PoE
Our PowerCat 6A system is suitable for the most demanding PoE applications:

IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+

HD Base-T PoH up to 100W

RP3 compliant as defined by EN 50174-2:2018, ISO/IEC 14763-2:2019 and AS/NZS 14763.2:2020

Notes:

For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be
used throughout.

To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more https://www.molexces.com/poe-calculator

Molex recommends that the PoE feature on an individual switch port are power disabled prior to unplugging the associated powered Device. Molex recommends that the full range of PowerCat 6A products be used in a system to
maximize cabling and PoE performance Details on Molex requirements for Warranty can be found at https://www.molexces.com/about-us/our-warranty/