x
earth

CUSTOMIZE YOUR EXPERIENCE

Close
Change Language: English Region: Americas

CoreSync Gateway 60W, Constant Voltage

'

Part No: 180993-2012

Region: global

The CoreSync 60W, Constant Voltage Gateway is a low-voltage power distribution and network connected module compliant with the IEEE 802.3at standard and Cisco’s UPOE standard that utilizes Power over Ethernet technology.
This CoreSync Gateway receives a minimum guaranteed 51 watts of usable power from a PoE Network Switch. Of the total 51W, up to 43.2W can power and control constant voltage LED fixtures, with the difference offering secure two-way communication with other CoreSync Daisy-Chained devices.

 

COMMERCIAL STANDARDS

PoE, PoE+, UPOE

Class 2 Electrical Device

UKCA

CE

BIS

UL 1310 Listed

CSA22.2 No. 250

FCC Part 15 Subpart B

Plenum Rated

Features & Benefits Technical Info Installation Instructions Related Products
  • Cisco UPOE compliant device- Uses low voltage PoE infrastructure for power and communication with lights, sensors, and other devices
  • Input power up to 60W- Capable of powering a single or multiple CoreSync devices
  • 24V Constant Voltage Output- Power and dimming control of constant voltage fixtures up to 43.2W
  • CoAP network communication- Easy and secure convergence of IP infrastructure
  • CoreSync Enabled- Daisy-Chain capable with easy connection to all CoreSync devices
  • UL 1310 listed- Safe operation and industry standard compliance

MECHANICAL
Housing Material: Extruded aluminum
Length: 117.7 mm (4.63 in)
Width: 53.33 mm (2.10 in)
Height: 25.51 mm (1.00 in)
Weight: 115 g (4.05 oz)

ELECTRICAL
Maximum Power Input: 60W at 42-57VDC
Maximum Power Output: 54.3W
Nominal Power Input: 51W (as per UPOE Standard)
Maximum LED Power Output: 43.2W at 24V
Standby Power Consumption: 2.0W at No Load
Power Consumption at 51W Input: 5.3W (18.08 BTU/hr)
Efficiency at full load: 90% (typical) at 52VDC input

ENVIRONMENTAL
Ambient Temp Range: 0 to 40°C (32 to 104°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Max. case temperature: 90°C
Relative Humidity: 10-80% Non-Condensing
Environmental Rating: Indoor

DIMMING PERFORMANCE
Dimming: PWM
Dimming Type: Linear
Dimming Frequency: 25KHz
Dimming Range: 1-100%

COMMERCIAL STANDARDS
PoE, PoE+, UPOE
Class 2 Electrical Device
UL 1310 Listed
UKCA
BIS
CE
CSA22.2 No. 250
FCC Part 15 Subpart B
Plenum Rated

PRODUCT SAFETY
Output Over-Current Protection
Internal Over-Temperature Protection
DO NOT hot swap

CONNECTION INTERFACES
PoE Input- RJ45, CAT 5e (PoE rated) cable or better (visit https://www.molexces.com)
CoreSync Output- 4-Pin Micro-Fit 3.0 Connector, CoreSync Harness (visit https://molexces.com)
LED Output- Poke-in Connector, solid core or stranded-tinned, 20-22AWG, 6mm strip length
• CH1 – LED Fixture